Check out our new Sartorius Product Line Shop Sartorius

Monthly Archives: July 2018

  1. About Sterlitech’s Flat Sheet Membrane Selection

    About Sterlitech’s Flat Sheet Membrane Selection

    As part of our goal to enable researchers, Sterlitech carries a comprehensive assortment of membranes for use in bench-scale filtration systems (such as our HP4750, CF016, CF042, and Sepa CF cells). We offer membrane filter sheets designed for use in reverse osmosis, nanofiltration, ultrafiltration, microfiltration, and forward osmosis applications.  Additionally, we offer membranes for membrane distillation and where this is a need for chemically resistant membranes.

    We are continually adding new products to our offerings; please visit the Flat

  2. Now Available: Synder MQ and MQ MAX Flat Sheet Membranes

    Now Available: Synder MQ and MQ MAX Flat Sheet Membranes

    Sterlitech is launching new flat sheet membranes from Synder Filtration to expand our line of ultrafiltration products. The MQ and MQ MAX models are polyethersulfone (PES)-based membranes designed for ultrafiltration separations in the food & dairy industry. Beverage clarification and specialty protein separation are two common applications for this membrane line.

    Both new models offer robust pH and temperature tolerance along with high resistance to fouling. They also exhibit similar permeate flux and separate proteins at 50 kDa MWCO. The MQ is supported by a polyester backing layer, while the MQ MAX has a polyester support. The MQ MAX has extended pH tolerance for increased resistance.

    Flat Sheet Membrane Comparison: Synder MQ and Synder MQ Max

     

          [1] GFD sta

  3. Ethanol Resistant Nanofiltration for A Simple and Efficient Cannabis Extraction Method

    Ethanol Resistant Nanofiltration for A Simple and Efficient Cannabis Extraction Method

    Legalization and the increasing demand for cannabis products have transformed technology used for extracts from simple to sophisticated in recent years. 

    Extract processing typically begins with a solvent wash, followed by winterization and/or filtration to concentrate the active compounds and to remove large impurities such as waxes. A final purification step aims to remove chlorophyll, thus producing the desirable amber concentrate, ready to be further modified into valuable end products. This time and labor consuming process can further be simplified and improved. Removing color while preserving THC and CBD’s still remains a challenge.

    Our solution for addressing both needs:

    According to Evonik Corporation’s recent presentation, Organic Solvent Nanofiltration (OSN) DuramemTM Membranes may not only simplify the

  4. A New Study is the First to Separate and React Water’s Two Molecular Forms

    A New Study is the First to Separate and React Water’s Two Molecular Forms

    Water molecules are ubiquitous, vital, and may have the world’s most well-known chemical formula (H₂O). The properties of water are quite unique; its solid state is less dense than its liquid state, raising pressure lowers its melting point, and it exists as a liquid at room temperature despite low molecular mass. Even more unique is the water molecule’s ability to exist as two distinct nuclear configurations called spin isomers.

    The two spin isomers of water molecules differ based on the direction of the nuclear spin of the two hydrogen nuclei. If the two hydrogen nuclei have parallel spins, the molecule is known as ortho-water. If the two hydrogen nuclei have opposite spins, the molecule is known as para-water. Water at room temperature always contains a mix of these two spin isomers and, until recently, it has been nearly impossible to study them separately.

    Now a study co-authored by Stefan Willitsch at the University of Basel has successfully isolated t

  5. Sterlitech to Exhibit at NAOSMM’s 45th Annual Conference

    Sterlitech to Exhibit at NAOSMM’s 45th Annual Conference

    The National Association of Scientific Materials Managers (NAOSMM) will be holding its 45th Annual Conference and Trade Show, July 22-27th in Spokane, Washington - just over the mountains from Sterlitech. We are excited to participate in this trade show for the 5th consecutive year and hope to meet with attendees at our booth, #22! We’re also looking forward to co-sponsoring the Tuesday Evening Out event at the show, as part of the Independent Laboratory Distributors Association (ILDA).

    This conference provides an opportunity for its over 500 members in the scientific industry to discuss current trends and issues, participate in seminars and workshops, and preview new products from vendors. NAOSMM’s