Hybrid Skid, Standard Configuration, 2 Lines, Digital, 110V, 50/60Hz, 1Ph, 3.1 GPM at 600 PSI
Contact us now to request a quote or inquire about stocked skids! Check out our MPD Overview page for more information.
Powered by Bioz
1190053
Sterlitech
3-4 weeks
| Cell Type | 1812 Housing (316SS), Sepa CF (316SS) |
| Membrane Sample Size1 | 1812: max 0.5 m², Sepa: 140 cm² |
| Configuration | 2 Parallel Lines |
| Feed Flow Rate | 11.7 LPM (3.1 GPM) |
| Max Pressure | 69 bar (1,000PSI) |
| Data Monitoring2 | Pressure, Flow Rate, Temperature, Conductivity, Scale |
| Max Temperature | 82 °C (180 °F) |
| Electrical Supply | 110V / 50/60Hz / 1 Phase |
| Pump and Motor Rating | Hydracell Diaphragm Pump, Leeson Washguard Motor |
Check out other related products below!
More Choices:
Frequently Asked Questions
Q: What is the recommended replacement frequency for the Hydracell pump oil?
Hydracell pump oil needs to be changed after the first 100 hours of operation. Then, pump oil should be changed according to the guidelines described in the pump user manual. For more information on the pump please see user manual.
Q: What is the maximum tolerance for feed water viscosity and particle size for the Hydracell pump (high pressure feed pump)?
The maximum feed water and the maximum solids size for the Hydracell pump are 150 cP and 200 µm, accordingly.
