Production Skid, Standard Configuration, 2x 4040 Housings, Analog, 460V, 50/60 Hz, 3 Ph
Contact us now to request a quote or inquire about stocked skids!
Powered by Bioz
1190120
Sterlitech
60x60x28
3-4 weeks
| Cell Type | 2x 4040 Housings |
| Configuration | 2 Lines, Series or Parallel |
| Feed Flow Rate | 129 LPM (34 GPM) |
| Max Temperature | 82°C (180°F) |
| Max Pressure | 69 bar (1000 PSI) |
| Electrical Supply | 460V, 50/60 Hz, 3 Ph |
| Pump and Motor | Hydra-Cell Diaphragm Pump, Leeson Washdown Motor |
Check out other related products below!
More Choices:
Frequently Asked Questions
Q: What is the recommended replacement frequency for the Hydracell pump oil?
Hydracell pump oil needs to be changed after the first 100 hours of operation. Then, pump oil should be changed according to the guidelines described in the pump user manual. For more information on the pump please see user manual.
Q: What is the maximum tolerance for feed water viscosity and particle size for the Hydracell pump (high pressure feed pump)?
The maximum feed water and the maximum solids size for the Hydracell pump are 150 cP and 200 µm, accordingly.
