Sartorius Products Are Now Available. Shop Now!

PETE (Polyester) Gold-Coated Membranes

PETE membrane is hydrophilic, it provides an advantage over the gold-coated PCTE membrane (which is hydrophobic) for filtering water samples.  It delivers an optimal reflection in Fourier Transform Infrared (FTIR) microscopy and Raman spectroscopy and form a suitable, conductive surface for imaging in scanning electron microscopy (EDX/WDX).

We provide the filters and technical support to help you take your breakthrough product from an idea to a prototype, to commercial scale.

SKUProduct Name Pore Size Diameter (mm) Pack Size Est Ship Price
1300038 Polyester (PETG) Gold-Coated Membrane Filters, 0.8 Micron, 100/0nm Coating, 13mm, 10/Pk 0.8 13 10 1-2 days
$115.27
1300039 Polyester (PETG) Gold-Coated Membrane Filters, 3.0 Micron, 100/0nm Coating, 13mm, 10/Pk 3 13 10 1-2 days
$115.27
1300040 Polyester (PETG) Gold-Coated Membrane Filters, 5.0 Micron, 100/0nm Coating, 13mm, 10/Pk 5 13 10 1-2 days
$117.21
1300036 Polyester (PETG) Gold-Coated Membrane Filters, 0.05 Micron, 100/0nm Coating, 25mm, 10/Pk 0.05 25 10 1-2 days
$298.37
1300041 Polyester (PETG) Gold-Coated Membrane Filters, 0.8 Micron, 100/0nm Coating, 25mm, 10/Pk 0.8 25 10 1-2 days
$200.65
1300042 Polyester (PETG) Gold-Coated Membrane Filters, 3.0 Micron, 100/0nm Coating, 25mm, 10/Pk 3 25 10 1-2 days
$200.65
1300037 Polyester (PETG) Gold-Coated Membrane Filters, 5.0 Micron, 100/0nm Coating, 25mm, 10/Pk 5 25 10 1-2 days
$200.65
1300043 Polyester (PETG) Gold-Coated Membrane Filters, 0.8 Micron, 100/0nm Coating, 47mm, 10/Pk 0.8 47 10 1-2 days
$556.10
1300044 Polyester (PETG) Gold-Coated Membrane Filters, 3.0 Micron, 100/0nm Coating, 47mm, 10/Pk 3 47 10 1-2 days
$556.10
1300045 Polyester (PETG) Gold-Coated Membrane Filters, 5.0 Micron, 100/0nm Coating, 47mm, 10/Pk 5 47 10 1-2 days
$556.10
per page
Set Descending Direction

Features

- Particle analysis by SEM/EDX, FTIR microscopy and Raman spectroscopy
- Identification and characterization of micro-and nanoparticles in pharmaceutical fluids and chemical auxiliary agents
- Testing for technical cleanliness in accordance with ISO 16232 and VDA 19
- Stable in liquid medium for longer filtration periods
- High contrast in SEM, FTIR microscopy and Raman spectroscopy
- Gold-coated on top side (100/0 nm)

Specifications

Pore Size Membrane Material Pore Density (cm-2) Membrane thickness (µm) Gold coating (top/down)
0.8µm Polyester 4.00 E + 07 22 100/0 nm
3.0µm Polyester 3.00 E + 06 20 100/0 nm
5.0µm Polyester 4.00 E + 05 19 100/0 nm

Documentation

Frequently Asked Questions


The pores of microporous membrane filters act as small capillaries.  When hydrophilic membranes come into contact with water, capillary action associated with surface tension forces causes the water to spontaneously enter and fill the pores.  In this manner, the membranes are easily wetted and allow the bulk flow of water through the pores.  Once wetted, hydrophilic membranes will not allow the bulk flow of air or other gasses, unless they are applied at pressures greater than the membrane’s bubble point.

Hydrophilic membrane filters are typically used with water and aqueous solutions.  They can also be used with compatible non-aqueous fluids.  Hydrophilic membrane filters are typically not used for air, gas or vent filtration since the filters would block flow if inadvertently wetted, by condensation for example.

When hydrophobic membranes come into contact with water, surface tension forces act to repel the water from the pores.  Water will not enter the pores and the membranes will act as a barrier to water flow, unless the water is applied at pressures greater than the membrane’s water entry pressure.  Low surface tension fluids, such as alcohols, can spontaneously enter and fill the pores of hydrophobic membranes.  Once all the air in the pores is displaced, there are no longer any surface tension forces and water can easily enter the pores, displace the low surface tension fluid, and pass through the membrane.  The membrane will then allow bulk flow of water for as long as the pore remain water filled.  If the membrane is allowed to dry (i.e. air enters the pores), then it must be pre-wet with a low surface tension fluid again prior to use with water.

Hydrophobic membrane filters are typically used with compatible non-aqueous fluids.  They are also commonly used as air, gas, or vent filters.  Hydrophobic membrane filters are sometimes used with water or aqueous solutions; and, in these applications, they must first be prewet with a low surface tension, water miscible fluid prior to use.

Q. What is a Polycarbonate or Polyester Track Etch filter membrane?

A. These types of filter membranes are precise, two-dimensional micro porous screens with straight through, cylindrical pores.

As in the case of other screen-type filters, particle capture takes place only on the surface, therefore there is more accurate separation cut-off. The precision cylindrical pores of Track Etch membranes have the most accurate size cut-off of any membrane. In depth filters, particles get caught throughout the torturous paths within the matrix as well as on the surface of the membrane.

Track Etch filters are also very thin (between 6 - 15 microns thick) but very durable (can withstand over 3,000 psi when properly supported).   They range in color from opaque to almost transparent and black.

It is possible to estimate the pore diameter of polyester track-etch (PETE) membranes from SEM images. In fact, this is how the pore size is characterized during manufacturing for most of the track-etch membranes. However, it is important to understand that there are calibration and performance variations between different SEMs. There is a good likelihood that a user’s results will not correlate to the manufacturing results that were used to characterize the membrane.

Q. What is the difference between nominal and absolute pore size ratings?

Nominal pore size ratings are provided as a general indication of filter retention.  It is understood that some quantity of particles greater than, and equal to, the nominal pore size ratings will pass through the filters into the filtrate.  Some manufactures may associate nominal pore size ratings with percentage filtration efficiencies. Nominal pore size ratings vary from manufacturer to manufacturer and, consequently, are not necessarily equivalent. Filters from different manufactures with similar nominal pore size ratings may not actually exhibit similar retention characteristics.

Absolute pore size ratings are typically based on retention studies performed using challenge suspensions of standard microorganism cultures or particles of known size. Absolute pore size ratings represent the size of the smallest microorganisms or particles completely retained during these studies. Absolute pore size ratings are almost always correlated to bubble point specifications that are used for quality control during membrane manufacturing. For the most part, absolute pore size ratings, especially those based on microbial retention, are comparable from manufacturer to manufacturer. There is more uncertainty for absolute pore size ratings based on particle retention studies, especially for pore size ratings <0.2µm, since there are no standard methods for these studies.

Regardless of pore size ratings, it is important to understand that application conditions do influence particle retention. Even filters with absolute pore size ratings can be operated in conditions that will allow unexpectedly sized particles to pass.