Swinnex, polypropylene, 13mm Filter Holder
The Swinnex® line of syringe filter holders are used to ultraclean or sterilize small volumes of liquids dispensed by syringe. Connect the Swinnex® 13 mm filter holder with tubing to pressurized reservoir or automatic filling machine for filtering larger volumes.
Make your own syringe filter! Swinnex® filter holders give you the flexibility to select the membrane type and diameter that are most appropriate for your application. For sterile filtration, autoclave your Swinnex® filter holders with the membrane in place. Ultraclean or sterilize small volumes of liquids dispensed by a syringe or install in-line to filter larger volumes.
Powered by Bioz
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
|
Filter size (mm) |
13 |
25 |
47 |
25 |
47 |
47 |
|
Body |
Polypropylene |
PFA |
PFA |
Polypropylene |
||
|
O-rings/ |
Silicone |
Perfluoroelastomer |
Perfluoroelastomer |
Silicone |
Silicone |
Silicone, PTFE |
|
Inlet/Outlet |
Female luer lock |
Female luer lock |
Combo ¼” NPTM |
Female luer lock |
Combo ¼” NPTM, |
Open face/ combo ¼” |
|
Max Pressure Diff. (psi) |
≤40 |
≤42 |
≤42 |
≤71 |
≤71 |
N/A |
|
Filtration Area (cm2) |
0.7 |
3.5 |
13.5 |
3.5 |
13.5 |
13.5 |
- Low pressure filtration (<71 psi for PP, <42 psi for PFA)
- Ultraclean and sterilize liquids
- Aseptic sampling of liquids or gases at point-of-use
- Environmental air sampling (PPO 47*)
- Syringe filter holders:
- Biofluids, ophthalmics, gas chromatography samples, and dust-free lubricants
- Particulate and microorganism removal from small samples (≤5ml)
Check out other related products below!
