PTFE Membrane Filters, Aspire Laminated, Hydrophobic, Polyethylene Mesh Backer, QL807, 0.7 Micron, 200 x 250mm, 5/Pk

Product Code	Backing Layer	Pore Size (µm)	Thickness in Mil (µm)	Air Permeability (ft³/min·ft² @ 125 Pa)	Water Entry Pressure (psi)	IPA Bubble Point (psi)	Surface Treatment
QL217	Polypropylene	0.1-0.2	6-10 (152-254)	0.07-0.25	>60	>17	Hydrophobic
QP952	Polyester	0.2	5-9 (127-229)	0.15-0.35	>50	≥17	Hydrophobic
QP955	Polyester	0.2	5-9 (127-229)	0.05-0.15	>60	>20	Hydrophobic
QL231	Polypropylene	0.2	6-10 (152-254)	0.12-0.30	>45	>17	Hydrophobic
QL822	Polypropylene	0.45	5-9 (127-203)	0.10-0.45	>37	>15	Hydrophobic
QL211	Polypropylene	0.45	8-12 (203-305)	0.6-1.2	>21	>10	Hydrophobic
QL827	Polypropylene	0.45	4-8 (102-203)	0.30-0.65	>12	N/A	Oleophobic
QP909	Polyester	1.0	6-10 (152-254)	0.3-0.8	>12	>6	Hydrophobic
QL209	Polypropylene	1.0	6-10 (152-254)	0.6-1.2	>18	>5	Hydrophobic
QL208	Polypropylene	3.0	6-10 (152-254)	1.5-3.5	>5	>1	Hydrophobic
QL207	Polypropylene	5.0	6-10 (152-254)	3.0-5.5	>5	>0.5	Hydrophobic
QL230	Polypropylene	5.0	6-10 (152-254)	4.8-8.0	>1	>0.5	Hydrophobic
QP930	Polyester	5.0	3-5 (76-127)	3.5-7.5	>2	>0.6	Hydrophobic
QL807	Polyethylene	0.7	5-10(127–254)	1.1 – 2.5	≥ 7.5	-	Hydrophobic

*In April 2018, several specifications for individual Aspire PTFE Membranes were revised based on improved characterization equipment and procedures. Membrane characterization has no impact on the manufacturing process for the membranes, and no change in performance should be expected.

* NOTE:

QP (Polyester) products max operating temp is 170°C for short term use and 130 - 150°C for continuous use.

QL (Polypropylene) products max operating temp is 130°C for short term use and 80°C for continuous use.

PTFE products max operating temp is 260°C.