Product gallery
SKU: PTFE013001
PTFE Laminated Membrane Filters, 0.1 Micron, 300 x 3000mm, 1/Pk
These hydrophobic PTFE membrane filters made of pure ePTFE laminated onto a polypropylene non-woven layer, providing strength and high chemical compatibility for aggressive solvent filtration, phase separations, venting, and aerosol sampling.
$501.24
Key Specifications
- Pore Size
- 0.1
- Diameter (mm)
- 300 x 3000
- Pack Size
- 1
- Brand
- Sterlitech
Performance by Pore Size
| Pore Size (µm) | Thickness (µm) | Air Permeability1 (L/min·cm² @ 70mbar) |
Water Entry Pressure (psi; bar) |
IPA Bubble Point (psi; bar) |
|---|---|---|---|---|
| 0.1-0.2 | 152-254 | 0.12-0.43 | >60; 4.14 | ≥17; 1.17 |
| 0.20 | 76-152 | 0.26-0.55 | >37; 2.55 | ≥17; 1.17 |
| 0.45 | 64-127 | 0.60-1.19 | >11; 0.76 | ≥10; 0.69 |
| 1.0 | 76-127 | 2.56-5.97 | >4; 0.28 | >8; 0.55 |
1 Values calculated assuming linear relationship between flow and differential pressure
* NOTE:
QP (Polyester) products max operating temp is 170°C for short term use and 130 - 150°C for continuous use.
QL (Polypropylene) products max operating temp is 130°C for short term use and 80°C for continuous use.
PTFE products max operating temp is 260°C.