Product gallery
SKU: 1121820
FTSH2O Flat Sheet Membrane, CTA, FO, Sepa, 5/Pk
FTS H2O™ flat sheet membranes are composed of cellulose and are low-fouling. They are able to process precipitating salts and polymerized organics with minimal impact on the process.
$515.37
Key Specifications
- Designation
- CTA
- Polymer
- Cellulose Triacetate
- Size
- Sepa
- Pack Size
- 5
- Brand
- FTS H2O
Specifications
FTS H2OTM |
|
|
Membrane material |
Cellulose Triacetate (CTA) |
| Operating conditions | Max. Operating Temperature: 50 °C pH range: 3-7 Maximum Chlorine 2 ppm Minimum Transmembrane Pressure: 5 psi* Max. Inlet Pressure 75 psi Recommended Pre-filtration: 100 um or lower (if particulates are present) |
| Packaging and storage | Refrigerated storage is recommended (3-25 °C) Membrane must be kept moist at all times1 Do NOT allow the membrane to freeze2 Do not store in direct sunlight |
| Shelf life | Up to 3 years |
1 Maintain higher pressure on the retentate feed side. Control permeate (draw solution) side to have some pressure and flow to keep minimum transmembrane pressure at 5 psi or above.
2 If membrane dries out, it is impossible to re-wet and should be discarded. If membrane freezes, the pore structure may its lose integrity and the membrane should be discarded.