HP4750X Assembly, Dursan® Coated with Hastelloy Fittings

Unique Design: The top of the cell is easily removed to fill the vessel with up to 300 mL of solution. The bottom is removable for easy membrane change-out. The design enables low hold-up volume of 1mL to prevent waste of valuable solutions.

High Pressure Operations: The HP4750 (X)Stirred Cell can complete a variety of separations from microfiltration to reverse osmosis. The standard cell is designed for safe operation to 69bar (1000psig) (HP4750X: 172 bar (2500 psig)).

Inert Gas Pressure Source: Standard sources of compressed air or inert gas allow variable, safe, and consistent supply of pressure to perform separations. Volatile solutions can be processed safely because of HP4750(X) Stirred Cell does not require a pump to supply operating pressure. Pressure regulators and relief valves are available from Sterlitech.

Mechanical Stirring Mechanism: Sterlitech can provide an optional mechanical stirrer to be used with the HP4750 (X).

Accepts Standard Membrane Disks:  HP4750 (X) Stirred Cell accommodates any 47-50 mm diameter membrane disk. For convenience, Sterlitech offers precut and packaged membranes in single type or assortment packs, from a wide selection of RO, NF, UF, MF, FO, OSN, and MD membranes.

Autoclavable: All components are fully autoclavable and sterilizable.

	HP4750	HP4750X	HP4750X Hastelloy™
Membrane Size	1.93 in dia. nominal (49 mm)	1.93 in dia. nominal (49 mm)	1.93 in dia. nominal (49 mm)
Active Membrane Area	2.26 in2 (14.6 cm2)	2.26 in2 (14.6 cm2)	2.26 in2 (14.6 cm2)
Processing Volume	Up to 300 mL	Up to 300 mL	Up to 300 mL
Hold-Up Volume	1 mL	1 mL	1 mL
Max Pressure	1000 psig (69 bar) w/high-pressure clamps	2500 psig (172 bar)	2500 psig (172 bar)
Max Temp	250 °F (121 °C) at 800 psig (55 bar)	400 °F (205 °C) at 2000 psig (138 bar)	400 °F (205 °C) at 2000 psig (138 bar)
pH Range	Membrane Dependent	Membrane Dependent	Membrane Dependent
Connections	Permeate Outlet: ⅛ in dia. 316L SS tubing; Pressure Inlet: ¼ in FNPT	Permeate Outlet: ⅛ in dia. 316L SS tubing; Pressure Inlet: ¼ in FNPT	Permeate Outlet: Hastelloy™ (C-276); Pressure Inlet: ¼ in FNPT
Cell Body	316L Stainless Steel	316L Stainless Steel	Hastelloy™ (C-276)
O-Rings	Buna-N, others available as options	Viton or PTFE	Viton or PTFE
Gasket	Buna-N, others available as options	Viton or PTFE	Viton or PTFE
Stir Bar	PTFE	PTFE	PTFE / Hastelloy Components
Cell Diameter	2.0 in (5.1 cm)	2.75 in (7.0 cm)	2.75 in (7.0 cm)
Cell Height	7.8 in (19.9 cm)	10 in (22.4 cm)	10 in (22.4 cm)
Cell Width	5.7 in (14.6 cm) w/high-pressure couplings	NA	NA