CF016A Electrode Modified Crossflow Assembly, Acrylic

Sterlitech Electric Field-Assisted Cross Flow Cells are bench-scale cross/tangential flow membrane test cells used in membrane separation processes. Applying an electric field to membranes enhances membrane performance by increasing electrostatic repulsion between membranes and foulants. This is possible because most membrane foulants including sludge flocs, soluble microbial products (SMP) and extracellular polymeric substances (EPS) are generally negatively charged. Sterlitech cross flow cells mimic hydrodynamic conditions present in real size systems. In real size systems, electric field can be applied in tubular, flat sheet or spiral wound modules.

PARAMETER	DESCRIPTION
Membrane Operation	Cross Flow
Cell Material	Acrylic
Membrane Active Area	20.6 cm² (3.2 in²)
Maximum Pressure	27.6 bar (400 PSI)
Maximum Temperature	88 °C (190 °F)
Recommended Feed Rate	0.5-2.5 LPM (0.13-.66 GPM)
Channel Dimensions
Channel Depth	2.28 mm (0.09 inches)
Channel Width	39 mm (1.54 inches)
Fittings
Inlet/Outlet Size (Tube OD)	3/8” Compression
Permeate Size (Tube OD)	1/4” Compression
Securing Method	High Pressure Screws

Note: Maximum Pressure and Temperature ratings are dependent on a variety of factors. Listed values are guidelines 
based upon material properties and cannot be guaranteed in every application.