1812 Element Housing, Dursan® Coated 316SS with Hastelloy Fittings, 1/2" OD Tube, Includes Female Adapters, 600 PSI Max, 1/ea (PTFE Encapsulated O-Rings & Gaskets)

Element housings are required for use with all spiral wound membrane elements.

316 stainless steel housing: 1812 elements
316 stainless steel / FRP housing: 2521, 2540, and 4040 female elements

Features

Bench-scale cross flow housings designed to evaluate spiral wound membrane elements in a variety of applications
Simulates the flow dynamics of commercially available spiral wound membrane elements
Operating conditions and fluid dynamics can be varied over broad ranges

Specifications

Housing	1812 Housing	1812 Housing (Evonik Compatible)	4040 Housing
General
Membrane operation	Cross flow
Housing material	316 stainless steel
Membrane active area	Variable (1–5 ft²)	Variable (1–5 ft²)	Variable
Membrane compatibility	Female elements, 1.6 cm (0.625 in) permeate ID	Male elements, 19 mm (0.75 in) OD permeate extension	Female elements with 3/4" permeate tube ID; male elements with 3/4" permeate tube OD
Gasket materials	EPDM (standard)	Viton (standard)	EPDM and Viton
Operating Limits
Max. pressure	41.3 bar (600 PSI)	60 bar (870 PSI)	69 bar (1,000 PSI)
Max. temperature	177°C (350°F)
Dimensions & Connections
Diameter	48 mm (1.88 in) internal	53.3 mm (2.10 in) internal	102.108 mm (4.02 in)
Length	375 mm (14.75 in) internal	510 mm (20.1 in) internal	1193.8 mm (47 in)
Inlet/outlet/permeate connections	12.7 mm (0.5 in) tube OD	3/8" sanitary fittings	1/2" compression
Securing method	High-pressure tri-clamp (sanitary) fittings		High-pressure clamps

Maximum pressure and temperature ratings depend on a variety of factors. Listed values are guidelines based on material properties and cannot be guaranteed in every application.