The Sepa CF II membrane cell system is a lab scale cross flow filtration unit that provides fast and accurate performance data with minimal amounts of membrane, product, expense or time.
Sepa CF II Membrane Cell System Product Benefits: • accepts any flat sheet membrane
• produces pressure up to 1000 psi (69 bar)
• laminar or turbulent flow
• fast, accurate performance data
• minimal exposure
• judicious membrane use
Sepa CF II Product Availability:
• purchase Sepa systems below
• rental units are available
• ask about complete bench units
Please note: In order to operate the Sepa CF II membrane cell system, a feed flow pump is also required. We recommend the Hydracell pump by Wanner Engineering, which is a positive displacement, diaphragm pump designed for high pressure, lower flow applications. When ordering, you will need to specify the power requirements for the motor. The minimum power available is 110V, 60 Hz. 220 V and 50 Hz motors are also available. There may be an additional cost if a variable speed drive is required.
The Sepa CF II membrane cell system hand pump is required in order to pressurize the cell holder but is not used for liquid flow.
For more information, visit the "Applications" tab below or contact us at 1-877-544-4420 or
sales@sterlitech.com to discuss these options further and to receive a detailed price quote.
Sepa Cell FAQ'S