HP4750 Stirred Cell Frequently Asked Questions

Q. What size membrane does the HP4750 Stirred Cell use?

Q. What material is the HP4750 Stirred Cell made out of?

Q. What type of stir plate do you recommend for use with the HP4750 Stirred Cell?

Q. What do I do to release the pressure on the HP4750 Stirred Cell?

Q. Can I cut a disc from a membrane sheet to use in the HP4750?

Q. What are your standard lead times?

Q. What size membrane does the HP4750 Stirred Cell use?

A. Any 47-50mm membrane disc can be used.

top of page

Q. What material is the HP4750 Stirred Cell made out of?

A. The cell itself is constructed of 316 stainless steel and utilizes a PTFE coated stirrer for chemical resistance.

top of page

Q. What type of stir plate do you recommend for use with the HP4750 Stirred Cell?

A. Any conventional magnetic stirrer will work.

top of page

Q. What do I do to release the pressure on the HP4750 Stirred Cell?

A. You will need a tee that has a needle valve so that you can slowly release the pressure when ready to lower the pressure. You will need a needle valve rated for at least 1000 psi with a ¼' NPT.

top of page

Q. Can I cut a membrane for use in the HP4750?

A. Yes, use the metal membrane support as a guide for cutting a disc.

top of page

Q. What are your standard lead times?

A. Sterlitech™ HP4750 Stirred Cell has a 30 - 45 day lead time depending upon quantity ordered.

top of page

HP4750 Stirred Cell Main Page.

Polymeric Membranes for the HP4750.