HP4750X Stirred Cell
The Sterlitech HP4750X stirred cell is a high-pressure chemical resistant stirred cell that performs a wide variety of membrane separations.
HP4750X Stirred Cell Product Benefits:
- Maximum pressure rating of 172 bar (2500 psig) at ambient temperatures
- Aqueous and non-aqueous solutions
- Autoclavable
- Chemical resistant stirred cell components
- Mechanical stirring mechanism
HP4750X Stirred Cell Product Availability:
- 316L stainless steel construction
- Viton or PTFE (Teflon) O-Rings and gaskets
| SKU | Name | Price | |
|---|---|---|---|
HP4750X
|
HP4750X PSI Stirred Cell |
$3,642.49
|
|
1144035
|
Mechanical Stirrer with 316 Stainless Stir Bar and Shaft (includes stand with motor, stirring mechanism, port for pressure connection) |
$5,343.08
|
|
1144028
|
PTFE, O-ring/Gasket Kit |
$32.45
|
|
1114910
|
Porous Support Disc |
$85.44
|
|
1143891X
|
HP4750X Cell Top |
Call for Price |
|
|
1143073-X2000
|
HP4750X Base End Cap |
Call for Price |
- Unique Design: The top of the cell is easily removed to fill the vessel with up to 300 mL of solution. The bottom is removable for easy membrane change-out. The design enables low hold-up volume of 1mL to prevent waste of valuable solutions.
- High Pressure Operations: The HP4750X Stirred Cell can complete a variety of separations from microfiltration to reverse osmosis. The standard cell is designed for safe operation to 172 bar (2500 psig).
- Inert Gas Pressure Source: Standard sources of compressed air or inert gas allow variable, safe, and consistent supply of pressure to perform separations. Volatile solutions can be processed safely because of HP4750X Stirred Cell does not require a pump to supply operating pressure. Pressure regulators and relief valves are available from Sterlitech.
- Mechanical Stirring Mechanism: Sterlitech can provide an optional mechanical stirrer to be used with the HP4750X.
- Accepts Standard Membrane Disks: HP4750 Stirred Cell accommodates any 47-50 mm diameter membrane disk.
For convenience, Sterlitech offers precut and packaged membranes in single type or assortment packs, from a wide selection of RO, NF, UF, and MF membranes.
- Autoclavable: All components are fully autoclavable and sterilizable.
| Specification | Description |
|---|---|
| Membrane Size | 49 mm diameter (1.93 inches) |
| Active Membrane Area | 14.6 cm2 (2.26 inches2) |
| Processing Volume | 300 mL |
| Hold-Up Volume | 1 mL |
| Maximum Pressure | 172 bar (2500 psig) |
| Maximum Temperature | 205°C(400°F)at 138 bars (2000 psig) |
| PH Range | Membrane Dependent |
| Permeate Outlet | 1/8-inch diameter 316L SS |
| Pressure Inlet | ¼-inch FNPT |
| Cell Body | 316L Stainless Steel |
| O-Rings | Viton or PTFE (Teflon) |
| Gaskets | Viton or PTFE (Teflon) |
| Cell Diameter | 7 cm (2.75 inches) |
| Cell Height | 22.4 cm (10.0 inches) |
Membrane Disc Filters
-
Silver Membranes
-
Cellulose Acetate Membranes
-
Ceramic Membranes
-
Glass Fiber Filters
-
MCE, Nitrocellulose Mixed Esters
-
Nylon Membranes
-
Polycarbonate (PCTE) Membranes
-
Polyester (PETE) Membranes
-
Polypropylene Membranes
-
Polyethersulfone (PES) Membranes
-
Polyvinylidene Difluoride (PVDF) Membranes
-
Regenerated Cellulose (RC) Membranes
-
Teflon (PTFE) Membranes
-
Membrane Filter Sample Packs
-
Membrane Disc Filter Accessories
Syringe and Capsule Filters
-
Cellulose Acetate Syringe Filters
-
Glass Fiber Syringe Filters
-
MCE, Nitrocellulose, Mixed Ester Syringe Filters
-
Nylon Syringe and Capsule Filters
-
Polyethersulfone (PES) Syringe and Capsule Filters
-
Polypropylene Syringe and Capsule Filters
-
Polyvinylidene Difluoride (PVDF) Syringe Filters
-
Teflon (PTFE) Syringe, Capsule and Vent Filters
-
Regenerated Cellulose Syringe Filters
-
Custom Syringe and Capsule Filters
Bench Scale Equipment
Pressure Filtration
Vacuum Filtration
Laboratory Equipment
Solid Phase Extraction
Monthly Specials
Newsletter