Micropump A Mount Gear Pump with Console Drive, 220 V, PEEK Gears/PTFE seals, 80 PSI, 0.84 GPM (3.2 LPM). Includes: Gear Pump, pump head, 2 polypropylene fittings (1/8" NPT x 3/8" Tube), and 20 feet of 3/8" Polypropylene tubing.
Micropump A Mount Gear Pump with Console Drive, 230 V, PEEK Gears/PTFE seals, Max. Delivery Pressure: 80 PSI, 0.84 GPM (3.2 LPM). Includes: Gear Pump, pump head, 2 polypropylene fittings (1/8" NPT x 3/8" Tube), and 20 feet of 3/8" nylon tubing.
Details
Micropump A Mount Gear Pump with Console Drive, 220 V, PEEK Gears/PTFE seals, 80 PSI, 0.84 GPM (3.2 LPM). Includes: Gear Pump, pump head, 2 polypropylene fittings (1/8" NPT x 3/8" Tube), and 20 feet of 3/8" Polypropylene tubing.
Applications
Forward Osmosis technology is most commonly used for an array of wastewater recycling and water reclamation applications. Areas in which an FO cell may be used include:
- Water reclamation from oil and gas exploration
- Landfill wastewater
- Alternative energy/biogas wastewater
- Medical/dental wastewater
- Membrane bioreactors
- Seawater desalination
- Radioactive wastewater
- Carpet manufacturing wastewater
- Pressure Retarded Osmosis (PRO) to generate electricity
Other uses for Forward Osmosis Cells:
- Pretreatment for Reverse Osmosis procedure
- Concentrating juices (grape juice to wine, tomato paste)
- Pharmaceuticals
- Nutraceuticals
Specifications
Specifications by Material:
Product Family | Innovator | Explorer | Developer | |||||||||
| ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Material |
Acetal (Delrin) |
316 Stainless Steel |
Virgin PTFE |
Acrylic |
Acetal (Delrin) |
316 Stainless Steel |
Virgin PTFE |
Acrylic |
Hastelloy™ |
316 Stainless Steel |
Acrylic |
Hastelloy™ |
Maximum Bolts Torque Setting (in-lbs) |
60 |
NA |
15 |
45 |
60 |
NA |
15 |
45 |
70 |
NA |
45 |
70 |
Maximum Fittings Torque Setting (in-lbs) |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
Max Pressure |
69 bar |
69 bar |
27.6 bar |
27.6 bar |
69 bar |
69 bar |
27.6 bar |
27.6 bar |
69 bar |
69 bar |
15.2 bar |
69 bar |
Max Temperature |
82°C |
150°C |
260°C |
88°C |
82°C |
150°C |
260°C |
88°C |
150°C |
150°C |
88°C |
150°C |
General FO Cell Specifications:
CF016-FO | CF042-FO | Sepa FO | |
---|---|---|---|
Active Membrane Area | 20.6 cm2 (3.2 in2) | 42 cm2 (6.5 in2) | 140 cm2 (22 in2) |
Hold-Up Vol. | 13 mL (0.44 oz) | 17 mL (0.57 oz) | 70 mL (2.4 oz) |
Connections |
Feed:1/4 in FNPT (base of cell) Draw Solute:1/4 in FNPT (top of cell) |
Feed:1/4 in FNPT (base of cell) Draw Solute:1/4 in FNPT (top of cell) |
Feed:1/4 in FNPT (base of cell) Draw Solute:1/4 in FNPT (top of cell) |
Outer Dimensions | 12.7 x 10 x 8.3 cm (5 x 4 x 3.25 in) | 12.7 x 10 x 8.3 cm (5 x 4 x 3.25 in) | 16.51 x 21.3 x 5 cm (6.5 x 8.38 x 2.07 in) |
Active Area Dimensions | 4.52 x 4.52 cm (1.78 x 1.78 in) | 9.207 x 4.572 cm (3.625 x 1.8 in) | 9.7 x 14.7 cm (3.81 x 5.78 in) |
Slot Depth | 0.23 cm (0.09 in) | 0.23 cm (0.09 in) | 0.19 cm (0.075 in) |
Animation
Here is an animation showing how FO systems typically operate:
Frequently Asked Questions
Q: Why is the flat sheet membrane I'm using measuring a flux value less than the published flux value?
Flow characteristics for a spiral element and flat sheet membrane are significantly different and are really only comparable on a qualitative basis. Variability in the membrane manufacturing process, differences in water composition, test procedures, and test equipment, used in a factory, laboratory, or elsewhere, will impact water flux results.